With advanced Anti-UV technology, USKOLOR X8 paint helps keep the color of the house bright and vibrant over time. The paint is improved with TiO2 nanoparticles, which can effectively absorb and disperse UV rays. TiO2 creates a photochemical reaction when exposed to UV rays, protecting the paint surface from the effects of ultraviolet rays, helping to minimize fading and damage caused by sunlight. In addition, X8 exterior paint also has outstanding water resistance, alkalinity and salt resistance, protecting your home against all harsh weather conditions.
Technical data:
– Ingredients: Acrylic resin, Tianium Dioxide, Kaolin, lead-free pigments and surfactants…
– Theoretical coverage: 14-16m²/liter/layer
– Surface drying time: ≤ 60 minutes
– Recommended number of layers: 2-3 layers
– Construction time for the next layer: at least 3 – 4 hours
USKOLOR X8 EXTERIOR PAINT GLOSSY
USKOLOR X8 EXTERIOR PAINT GLOSSY is the perfect exterior paint solution to protect the color of your home. The product is applied with advanced American color protection technology, helping the paint film resist the effects of UV rays and harsh environmental factors. Your home will always maintain its luxurious and durable beauty over time.
- 3 outstanding features:
+ High color fastness
+ Anti-alkali
+ Anti-moss, mold
Product Description
Product instructions
Surface preparation:
– The surface to be painted must be undamaged, clean, free of dust, grease and cement resin, etc. For dirty and chalky surfaces, it is necessary to clean with a stiff bristle brush.
– For new walls, surface humidity must be below 16% according to a moisture meter or the wall surface must be dry for 21 – 28 days under normal conditions (average temperature 30°C, ambient humidity 80%).
Construction:
– Apply 2 layers of alkali-resistant exterior primer, then let it dry completely for 18-24 hours before rolling the first layer of gloss paint.
– Stir the paint bucket thoroughly. If it is thick, add 5-10% clean water to adjust the consistency depending on temperature and humidity, then stir again until homogeneous. If mixed more than specified, the quality of the paint film will be reduced. Once the paint is mixed with water, it must be used up completely.
– Use a brush or smooth roller to cover the wall in 2-3 layers, each layer spaced at least 3-4 hours apart.
– Apply in dry weather, material surface temperature not exceeding 35°C and not less than 9°C.
– Cleaning: Rinse tools with clean water after use.
Safety Information
– Avoid direct contact with skin, use appropriate protective equipment
– May cause long-term harmful effects to aquatic habitats
– Keep out of reach of children
– Use only in a well-ventilated area.
Related products
Mua ngay
Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.